Tag Archives: plumbing

Bathroom Plumbing: Is it Time for Updates and Change?


PlumbingYour bathroom is one busy place. This is why your plumbing system may need an update or replacement over time. Daily baths, showers, use of sink, and toilet flushes can take a toll on the pipes behind old or outdated bathroom fixtures.

Plumber contractors in Salt Lake City share a few signs that you need to update or change your bathroom plumbing:

Faulty hardware

Apart from making your bathroom look dated, old and faulty hardware can harm your health. This is especially true if there’s rust in the faucet or if there are bits of metal in the water stream. You can replace a faulty hardware on your own, but you can also hire a professional to avoid any problem.

Slowly draining tubs or showers

Standing water in the tub or shower may indicate a clogged drain. You can use a mix of vinegar and soda to resolve the clogs, but this may only provide temporary relief. If the water pools easily on the floor after running the tub, it is likely that the hardware is not sealed properly. You’ll need a plumber to address the issue effectively.

Unpleasant water smell

If the water in the bath smells rusty or bad, you may need to replace the water heater. Corrosive elements may be collecting in the hot water tank, resulting in a faulty system or smelly water. Replacing an old unit with an efficient one can help solve this problem.

Bathroom mold

If you see mold growth on walls and ceilings, it means that the water is running where it should not. Water on the floors or wet spots on ceilings and walls usually indicate a leak. You may want to call a plumber to find the source of the leak and deal with the problem efficiently.

Upgrades or replacement will not only make your bathroom look new and clean, it can also keep you and your family safe. If you have some budget to spare, it is also a good idea to do some remodeling in the space.

When Should A Hot Water Heater Be Drained?

Plumbing SystemWater heaters don’t last forever. Eventually, even a high-end system will suffer from wear and eventually break down. And when heater repair specialists from companies like Action Plumbing are called, they often find a few familiar issues, such as a build-up of sediment in the heater because the homeowner has failed to drain the system regularly.

The Dangers of Sediment Build-Up

When it comes to draining a water heater, it’s not just a recommendation but a necessity to clean it regularly. Sediment is a component of any water supply. As the water travels through the distribution system, trace amounts of sediment can be picked up, settling at the bottom of the water heater over time.

Eventually, the sediment build-up can lead to water displacement in the tank. The sediment at the bottom of the heater displaces the water above it. This results in hot spots developing on the bottom of the tank which spread the heat unevenly. This can be a big problem for users of gas water heaters. Over time, the problem of uneven heating in the tank may even lead to leaks.

How Often to Drain?

Experts are unanimous that tanks should be drained at least once a year. Experts believe that annual flushes prevent the problem of sediment build-up and the development of hot spots.

If the municipal water supply in your area is relatively clean, you may not have to flush the system as often as recommended. Certain area throughout the country, such as Seattle, just happen to have cleaner water than most. However, it can often be difficult to judge the water purity in your areas, so it’s safer to stick to the recommendations just to save you trouble later.

Final Thoughts

Water heaters are powerful tools, but they require ideal conditions to operate properly. This includes a crystal-clear tank where are no problems with water displacement and hot spots. If there’s a layer of sediment at the bottom of the tank, not only will the water be unevenly heated, but the heater will have to work much harder. Over time, this can lead to costly problems. So, do yourself (and your wallet) a favor by draining the tank at least once a year.